$11.44
Original: $38.15
-70%CASE DEEPCOOL MATREXX 55 MESH—
$38.15
$11.44The Story
CASE DEEPCOOL MATREXX 55 MESH
-Compact ATX case that supports motherboards up to E-ATX.
-4mm Tempered Glass providing great view and safety.
-Mesh front panel providing massive cooling compatibility.
-210mm wide tower compartment with 23mm cable management clearance.
-A magnetic dustproof net on top and dust-filters at the front and bottom.
Motherboard Mini: -ITX/Micro-ATX/ATX/E-ATX
Case Type: Middle Tower
Materials: ABS+SPCC+Tempered Glass
Product Dimensions: 440X210X480mm
Carton Dimensions: 523X277X514MM
5.25″ Drive Bays 0
3.5″ Drive Bays 2
I/O Ports USB2.0×2、USB3.0×1、Audio×1、Mic×1
Expansion: Slots 7 Slots
Power Supply: Type ATX PS2 （Length less than 170mm）
Cable Management: 23mm clearance
CPU Cooler Height Limit: 165 mm
VGA Length Limit: 370mm
P/N DP-ATX-MATREXX55-MESH-AR-3F
-
80 PLUS Bronze certified, with 85% efficiency or higher under typical loads
-
Single 12V Rail
-
Active Power Factor Correction (PFC)
-
Heavy-duty protections, including OVP (Over Voltage Protection), UVP (Under Voltage Protection), OCP (Over Current Protection), OPP (Over PowerProtection), SCP (Short Circuit Protection), and OTP (Over Temperature Protection)
MATREXX 55 MESH ADD-RGB 4F
The clear choice
Matrexx 55 Mesh ADD-RGB 4F is a high airflow case that comes with included A-RGB lighting system and full size tempered glass.
4MM THICK TEMPERED GLASS
Full sized 4mm thick, tempered glass side panel gives the case a unique look to perfectly show off your inner structure
MASSIVE COOLING COMPATIBILITY
Optimized airflow is guaranteed with large air intakes on both sides of the front panel and an air exhaust in the back and on top, to keep your components cool
ADD-RGB LIGHTING SYSTEM INCLUDED
4 ADD-RGB fans are included in the system, as well as 2 control approaches.
CASE BUTTON CONTROL：
Connect fans to case control module, and power up with PSU SATA cable, then control with RGB button.
MOTHERBOARD CONTROL：
Connect fans to motherboard header and use software to control.( Please note: When using motherboard control, disconnect PSU SATA cable. )
COOLING COMPATIBILITY:
Supports the installation of liquid cooler:
1
120/240mm radiator liquid cooling system on the top
2
120mm radiator liquid cooling system at the rear
3
120/140/240/280/360mm radiator liquid cooling system at the front
Supports the installation of cooling fans:
1
2×120/ 2×140mm fan on the top
2
1×120mm fan at the rear
3
3×120mm/2×140mm fan at the front
PSU SHROUD ADDED
The Matrexx 55 Mesh version is equipped with a PSU Shroud to hide the cables and to keep the system neat and tid
EASY CABLE MANAGEMENT
Cable managing is now easy with a 210mm wide tower compartment (23mm clearance)
Supporting 165mm (max) CPU cooler height
Power Supply: ATX PS2 (Length less than 170mm)
Supports 370mm (Max) graphic cards installation
4x2.5'' SSD slots and 2x3.5'' HDD cages
The magnet-mounted dust filter provided at the front panel, offers users easy removal and cleaning
Brand |
EVGA |
|---|---|
Product Dimensions |
15 x 14 x 8.5 cm; 1.94 Kilograms |
Item model number |
100-BR-0500-K3 |
Manufacturer |
EVGA |
Series |
EVGA 500 BR BRONZE |
Color |
Black |
Wattage |
500 watts |
Item Weight |
1.94 kg |
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
CASE DEEPCOOL MATREXX 55 MESH
-Compact ATX case that supports motherboards up to E-ATX.
-4mm Tempered Glass providing great view and safety.
-Mesh front panel providing massive cooling compatibility.
-210mm wide tower compartment with 23mm cable management clearance.
-A magnetic dustproof net on top and dust-filters at the front and bottom.
Motherboard Mini: -ITX/Micro-ATX/ATX/E-ATX
Case Type: Middle Tower
Materials: ABS+SPCC+Tempered Glass
Product Dimensions: 440X210X480mm
Carton Dimensions: 523X277X514MM
5.25″ Drive Bays 0
3.5″ Drive Bays 2
I/O Ports USB2.0×2、USB3.0×1、Audio×1、Mic×1
Expansion: Slots 7 Slots
Power Supply: Type ATX PS2 （Length less than 170mm）
Cable Management: 23mm clearance
CPU Cooler Height Limit: 165 mm
VGA Length Limit: 370mm
P/N DP-ATX-MATREXX55-MESH-AR-3F
-
80 PLUS Bronze certified, with 85% efficiency or higher under typical loads
-
Single 12V Rail
-
Active Power Factor Correction (PFC)
-
Heavy-duty protections, including OVP (Over Voltage Protection), UVP (Under Voltage Protection), OCP (Over Current Protection), OPP (Over PowerProtection), SCP (Short Circuit Protection), and OTP (Over Temperature Protection)
MATREXX 55 MESH ADD-RGB 4F
The clear choice
Matrexx 55 Mesh ADD-RGB 4F is a high airflow case that comes with included A-RGB lighting system and full size tempered glass.
4MM THICK TEMPERED GLASS
Full sized 4mm thick, tempered glass side panel gives the case a unique look to perfectly show off your inner structure
MASSIVE COOLING COMPATIBILITY
Optimized airflow is guaranteed with large air intakes on both sides of the front panel and an air exhaust in the back and on top, to keep your components cool
ADD-RGB LIGHTING SYSTEM INCLUDED
4 ADD-RGB fans are included in the system, as well as 2 control approaches.
CASE BUTTON CONTROL：
Connect fans to case control module, and power up with PSU SATA cable, then control with RGB button.
MOTHERBOARD CONTROL：
Connect fans to motherboard header and use software to control.( Please note: When using motherboard control, disconnect PSU SATA cable. )
COOLING COMPATIBILITY:
Supports the installation of liquid cooler:
1
120/240mm radiator liquid cooling system on the top
2
120mm radiator liquid cooling system at the rear
3
120/140/240/280/360mm radiator liquid cooling system at the front
Supports the installation of cooling fans:
1
2×120/ 2×140mm fan on the top
2
1×120mm fan at the rear
3
3×120mm/2×140mm fan at the front
PSU SHROUD ADDED
The Matrexx 55 Mesh version is equipped with a PSU Shroud to hide the cables and to keep the system neat and tid
EASY CABLE MANAGEMENT
Cable managing is now easy with a 210mm wide tower compartment (23mm clearance)
Supporting 165mm (max) CPU cooler height
Power Supply: ATX PS2 (Length less than 170mm)
Supports 370mm (Max) graphic cards installation
4x2.5'' SSD slots and 2x3.5'' HDD cages
The magnet-mounted dust filter provided at the front panel, offers users easy removal and cleaning
Brand |
EVGA |
|---|---|
Product Dimensions |
15 x 14 x 8.5 cm; 1.94 Kilograms |
Item model number |
100-BR-0500-K3 |
Manufacturer |
EVGA |
Series |
EVGA 500 BR BRONZE |
Color |
Black |
Wattage |
500 watts |
Item Weight |
1.94 kg |
